Our compression testing equipment has designed so that it efficiently meets the need to test concrete cube for its compressive strength.

This equipment is the most simple, economical and reliable means of testing.

These are available at competent prices. Our range includes the following two models:

We manufacture electrical cum hand operated compression testing machine which is a hydraulic, electrically operated unit and is designed for compression tests on concrete specimens up to 20 cm. diameter (or width and depth) and 30 cm, in height and also for rocks and various other materials. It can also undertake cold crushing strength (CCS) test.

Our equipment consists of best grade steel cross head and cast iron base with two pillars connecting the base and cross head by means of nuts. It has a hydraulic jack which is fixed to the base. The upper platen has got a self aligning action and is attached to a screw which passes through the cross head and can be raised or lowered for initial clearance adjustment. The lower platen rests on the jack ram and is positioned with the help of a centering pin Loading is accomplished by the upward movement of the lower platen. The motorized pumping unit is of plunger type and is connected to the jack by means of a steel connecting tube. A maximum red pointer is provided to facilitate taking of the readings after failure of specimens. The pressure gauges are of 20 cm diameter. With isolating valves are fixed on the pumping unit at an angle for easy readability. The machine is fitted with control which enables the rate of application of load to be varied.

The machine is equipped with facilities for hand operation as well. The electrical pumping unit is fitted with three micro switches one for each pressure gauge and will switch off the machine automatically as the load on the machine approaches its full capacity of the gauge in case the isolating valves are not operated. This will protect the pressure gauges and the whole unit so that in case of break down of power supply, the machine will stop and will not restart unless the starting switch is operated.

Compression Testing Machine 1000KN (100 Tons) Capacity (Four Pillar-Portable Model) Hand Operated fitted with 20cm diameter load gauge.

Designed for testing of Cement, Concrete and Mortar Cubes of various sizes by help of spacer block to cover the gap between platen and sample.

The Concrete Cylindrical samples up to 15cm diameter x 30cm ht can also be tested on the machine. The Machine is calibrated against NPL/NCCBM certified Proving Ring.

The slump test apparatus offered by us is manufactured using superior quality raw material in confirmation to BIS: 7320 quality standards. Widely used for determination of workability of concrete, these ensure accurate results. We offer these slump test apparatus in both standard as well as custom specifications as per the client's requirements.
Features:

* Consists of slump cone with handles and foot pieces.
* Foot pieces can be fixed to the clamps on the base plate.
* The base plate has lifting handle for easy transportation.
* Tamping rod is provide for compacting the specimen and measuring the slump of concrete.
* Highly functional.
* 100% rust free and abrasion resistant